A grease trap catches floating grease and settled food solids before wastewater reaches the drain line. As those layers build, they take up space and can reach the outlet. You may notice slow sinks, odors near the trap, or grease showing up where it should not. Pumping removes the accumulated waste; cleaning the walls and baffles may also be part of the work, so ask what is included. If your kitchen has an inspection coming up or a drain problem today, call to describe it to a provider nearby.
Call (877) 704-1271 to reach a provider →
What a pump-out removes
A pump-out removes the contents of a grease trap or interceptor, including the grease layer at the surface and food solids collected at the bottom. Removing the water along with that waste helps expose buildup on the walls and around internal parts.
Ask whether the work includes scraping the walls, cleaning the baffles and checking that the outlet tee is clear. Those steps can matter when hardened grease remains after the liquid is removed.
- Floating grease near the surface
- Settled food solids on the bottom
- Wastewater held inside the trap
The 25 percent rule and how frequency is set
Many local authorities use what is often called the 25 percent rule. Under that guideline, pumping happens before floating grease and settled solids together reach 25 percent of the trap’s total liquid depth.
Your city or sewer district sets the required schedule. The guideline helps explain why the right pumping frequency depends on what collects inside your equipment, rather than on a calendar alone.
A fryer-heavy kitchen can reach that level in a couple of weeks, while a light-prep kitchen may take far longer. Keep a pumping log and ask the provider to note grease and solids levels so you can discuss the schedule with your city or sewer district.
What the provider should leave you
Keep documentation where kitchen staff can find it before an inspection or the next pump-out. Ask what the provider records for each visit, especially if your trap and interceptor have separate maintenance logs. The paperwork should identify the equipment serviced and show what was removed.
- A waste manifest showing where the contents went
- A service log entry with the pumping date
- The trap or interceptor identified on the record
- Notes on grease levels or damaged baffles, if observed
Check the manifest and log entry before filing them. If a record is unclear, ask the provider to explain it while the visit is still fresh.
Signs you are overdue
- Standing water in a sink that usually drains freely
- Grease odors around the trap or interceptor lid
- Grease visible near the outlet tee
- Wastewater backing up through a floor drain
- A maintenance log with no recent pump-out entry
These signs can mean the trap needs pumping, though a blocked line can cause similar drain trouble. Describe where the problem appears and check your pumping log before discussing the work needed.
What happens to the waste after pumping
Pumped grease trap waste is hauled away for handling at a facility that accepts it. The destination and handling process depend on the waste and local requirements. It should not go back into a sink, floor drain, or outside drain.
Ask the provider for a waste manifest that records the removal and destination. Keep it with your service log so you have a record of what left the kitchen. If the manifest uses terms you do not recognize, ask what they mean before filing it.
What affects the price of a pump-out
The amount of waste, the equipment’s location, and how easily the lid can be reached can affect the work involved. Heavy buildup on walls or baffles may require more cleaning than removing liquid and loose solids. An in-ground interceptor may also have different access needs from an indoor trap. Before scheduling, describe the equipment, any access limits, and the cleaning you expect. Ask the provider what the quoted work includes, how waste handling is covered, and whether a manifest is included.
Grease trap pumping questions
How do I know when my trap was last pumped?
Check the service log, waste manifest, or maintenance records for the pumping date and equipment serviced. If the records are missing, ask the provider what information they can document at the next pump-out. Keep that entry with your kitchen’s service records.
Does pumping include cleaning the walls and baffles?
The scope can vary. Ask whether the provider will remove hardened grease from the walls and baffles after pumping out the contents. Also ask about checking the outlet tee and noting any damaged parts in the service record.
Can I set up a recurring pumping schedule?
Yes, you can ask a provider about recurring service. Your city or sewer district sets any required schedule, while the grease and solids collected between visits can help you judge whether that schedule fits your kitchen’s use.
Do I need to be on site during the pump-out?
Ask the provider what access they need and whether someone must be present. They may need a clear path to the lid, access to the equipment, and a way to leave the manifest and service log entry with the kitchen.